Asus Smart Login

Is the blue light on your Asus router blinking? Depending on your model, that light can mean different things. It usually means that the router is either:

• Making an effort to connect to the internet
• Looking for an AIMesh mesh node
• After a reset, awaiting setup
• This is how to read it and react to it.

Potential Reasons and Solutions: 

1. After a Reset or New Configuration

• Immediately following a factory reset, a blinking blue light is typical. It indicates that the router is awaiting setup. To finish the setup, go to router.asus.com after connecting to the router via Ethernet or WiFi.

2. No Internet Found

Your Asus router won’t get a signal if the modem is broken or the WAN/Internet wire is unplugged. This results in asus router blinking blue light:

• Make that the modem is connected to the WAN port.
• Turn on the router after power cycling your modem and waiting 30 seconds.
• Ask your ISP if there is a service outage.

3. If utilizing a mesh system, AiMesh Node Search

• The router may be attempting to pair with the main node if it is blinking blue when in AiMesh mode. Make sure both are powered on, or bring the node closer.

4. Rare Firmware Corruption

• Rarely, a blinking pattern could be the result of a faulty update. To reflash the firmware via USB or TFTP, try going into recovery mode.
• Asus Login While Blinking Light: You may typically still use the web interface at router.asus.com to troubleshoot the problem if the blue light blinks but WiFi is still visible.

Are you still stuck? To scan and configure the device, use the Asus Router mobile app.

Visit our website for more information about login asus router.